New ISO specification for ETC systems

January 27, 2010

A newly published ISO Technical Specification harmonises the requirements for electronic fee collection (EFC) systems on roads subject to toll charges. It will facilitate mobility between different road networks and help to ensure reliable data collection and correct charging.

ISO/TS 12813:2009, “Electronic fee collection – Compliance check communication for autonomous systems”, will help to ensure the optimal use of on-board equipment (OBE) interfacing with satellite positioning to collect the data required for charging for the use of roads in an autonomous mode, without relying on dedicated road-side infrastructure.

The standard defines the requirements for using dedicated short range communication (DSRC) between on-board equipment and an interrogator for the purpose of checking compliance of road use with a local toll regime. This will enable checking of non-national vehicles and thus enable cross border enforcement of non-compliant vehicles.

The scope of the Electronic Fee Collection (EFC) standards relates to EFC charging systems and information exchanges over the interfaces. The standards focus on the interface between the on-board and the roadside equipment, but also deal with the ‘Information data flows between operators’. The standards primarily cover EFC systems based on Dedicated Short-Range Communication (DSRC); Cellular Network / Global Navigation Satellite Systems (CN/GNSS), and Integrated Circuit Card (ICC) technologies.

The standards suite includes not only ‘requirements’ but also associated test procedures, in order to support conformity evaluation of EFC on-board and roadside equipment. It also includes security guidelines that can be useful in the preparation or evaluation of security requirements.

ISO/TS 12813:2009, Electronic fee collection – Compliance check communication for autonomous systems, was jointly developed by ISO technical committee ISO/TC 204, Intelligent Transport systems and CEN/TC 278, Road transport and traffic telematics.

One comment on “New ISO specification for ETC systems” Post your comment

  1. Chetna.A.Patel on September 29th, 2010 9:27 am

    Alternative to Microwave Technology (CEN 278) is Active RFID Technology for ETC by BISA Technologies HK Ltd. Compare to traditional highway toll collection method or any other Pasive RFID Technology, BISA active-RFID based intelligent toll collection is superior with long distance and high speed identifaction performance.

    For more details visit our wepage
    Contact: Ms Chetna.A.Patel at 852 24230600 ext 109

Share your comments here: